Verified source report
Meet NASA Low Outgassing Standards With Adhesives for Aerospace and Optical Systems
This sponsored article is brought to you by Master Bond . Outgassing is the release of volatile substances from a cured adhesive over time. These released materials, which may include residual solvents, unreacted monomers, or other chemical species, can deposit on nearby surfaces, causing contamination that interferes with sensitive components. What Is Outgassing and How Is It Measured? The industry standard for measuring outgassing is ASTM E595, developed by NASA . This test exposes a cured sample to 125 °C at high vacuum (10⁻⁵ to 10⁻⁶ torr) for 24 hours, measuring Total Mass Loss (TML) and Collected Volatile Condensable Materials (CVCM). To meet NASA low outgassing requirements, materials must exhibit less than 1 percent TML and less than 0.1 percent CVCM. Optical assemblies need contamination-free bonding and prevention of fogging the optics to maintain clarity. High-vacuum scientific
What happened
According to IEEE Spectrum’s source item, Meet NASA Low Outgassing Standards With Adhesives for Aerospace and Optical Systems, This sponsored article is brought to you by Master Bond . Outgassing is the release of volatile substances from a cured adhesive over time. These released materials, which may include residual solvents, unreacted monomers, or other chemical species, can deposit on nearby surfaces, causing contamination that interferes with sensitive components. What Is Outgassing and How Is It Measured? The industry standard for measuring outgassing is ASTM E595, developed by NASA . This test exposes a cured sample to 125 °C at high vacuum (10⁻⁵ to 10⁻⁶ torr) for 24 hours, measuring Total Mass Loss (TML) and Collected Volatile Condensable Materials (CVCM). To meet NASA low outgassing requirements, materials must exhibit less than 1 percent TML and less than 0.1 percent CVCM. Optical assemblies need contamination-free bonding and prevention of fogging the optics to maintain clarity. High-vacuum scientific
Context
The development sits in VINI’s Technology file for readers following technology, science, product policy, markets, infrastructure, and the public consequences of innovation. The original report is linked so readers can check the source account, follow later updates, and compare new coverage against the first published record. The source item is dated 2026-05-26T10:00:01+00:00.
What to watch
Open questions include whether primary sources issue follow-up statements, whether local or market impacts become clearer, and whether additional reporting changes the timeline or adds material context.
Source
Primary source: Meet NASA Low Outgassing Standards With Adhesives for Aerospace and Optical Systems via IEEE Spectrum. VINI cites and links the source; it does not reproduce the publisher’s full article text without rights clearance.
This source-cited VINI report links to the original publisher record. VINI does not republish third-party article bodies without rights clearance. 1 source listed.
Source links
- Meet NASA Low Outgassing Standards With Adhesives for Aerospace and Optical SystemsIEEE Spectrum - 2026-05-26T10:00:01+00:00
Reader comments
Moderated discussion
Comments are open to authenticated approved accounts, screened for spam and abuse, and published only after newsroom moderation unless editors change the story control.